Skip to content
Android waitlistTry on iPad
Get started

Forces, stress and mechanical efficiency: OCR A‑Level Design Engineering questions

OCR A-Level Design Engineering past-paper questions on 6.3 Forces, stress and mechanical efficiency, 2021–2025, with mark schemes and examiner’s reports where available.

Past paper difficulty
Paper
All papers
Exam
All years

Loading the full question list…

193 questions

  1. Q3(a)(ii)

    June 2024 · H404/02 · ★★★★

    Sources (insert) ↗
    The whole paper ↗
    1
    Setup for original question 3(a)(ii)

    Loading the question setup…

    Original question 3(a)(ii): A child with a mass of 78 kg sits on the swing seat, without swinging. Determine by calculation that the stress in one of the swing ropes is 3.39 MPa. Show your

    Loading the question…

  2. Q3(a)(iii)

    June 2024 · H404/02 · ★★★

    Sources (insert) ↗
    The whole paper ↗
    2
    Setup for original question 3(a)(iii)

    Loading the question setup…

    Original question 3(a)(iii): Calculate the extension of a swing rope caused by a stress of 3.39 MPa. Give your answer in mm to 1 decimal place. Show your working. Refer to the information o

    Loading the question…

  3. Q1(d)(ii)

    June 2022 · H404/01 · ★★★

    The whole paper ↗
    3
    Setup for original question 1(d)(ii)

    Loading the question setup…

    Original question 1(d)(ii): The total mass of the electric scooter and rider is 85 kg. The electric scooter reaches a constant speed after 3 seconds. Use the information in part (d)(i) to

    Loading the question…

  4. Q4(d)(ii)

    November 2021 · H404/01 · ★★

    The whole paper ↗
    4
    Setup for original question 4(d)(ii)

    Loading the question setup…

    Original question 4(d)(ii): The handle is likely to break if the electrically powered cool box is carried when it is overloaded. Sketch a diagram to show the likely mode of failure of the

    Loading the question…

  5. Q4(b)(ii)

    November 2021 · H404/02 · ★★★

    Sources (insert) ↗
    The whole paper ↗
    5
    Setup for original question 4(b)(ii)

    Loading the question setup…

    Original question 4(b)(ii): Tests have been carried out to determine that the average tensile force in the polymer rope will be 4200 N. Calculate the tensile stress (in N/m2) in the polyme

    Loading the question…

  6. Q4(b)(iii)

    November 2021 · H404/02 · ★★★

    Sources (insert) ↗
    The whole paper ↗
    6
    Setup for original question 4(b)(iii)

    Loading the question setup…

    Original question 4(b)(iii): When the polymer rope is under tension it will stretch. Calculate the extension of the polymer rope in m when the stress is at the value you calculated in part

    Loading the question…

  7. Q1(d)

    Specimen · H404/01 · ★★

    The whole paper ↗
    7
    Setup for original question 1(d)

    Loading the question setup…

    Original question 1(d): The total weight of the bicycle and rider is 148N. The area of each tyre in contact with the ground is 500mm2. Calculate the pressure each tyre exerts on the gr

    Loading the question…

All 7 questions on Forces, stress and mechanical efficiency, as a list
  1. June 2024, H404/02, Q3(a)(ii) (4 marks): A child with a mass of 78 kg sits on the swing seat, without swinging. Determine by calculation that the stress in one of the swing ropes is 3.39 MPa. Show your
  2. June 2024, H404/02, Q3(a)(iii) (3 marks): Calculate the extension of a swing rope caused by a stress of 3.39 MPa. Give your answer in mm to 1 decimal place. Show your working. Refer to the information o
  3. June 2022, H404/01, Q1(d)(ii) (3 marks): The total mass of the electric scooter and rider is 85 kg. The electric scooter reaches a constant speed after 3 seconds. Use the information in part (d)(i) to
  4. November 2021, H404/01, Q4(d)(ii) (2 marks): The handle is likely to break if the electrically powered cool box is carried when it is overloaded. Sketch a diagram to show the likely mode of failure of the
  5. November 2021, H404/02, Q4(b)(ii) (3 marks): Tests have been carried out to determine that the average tensile force in the polymer rope will be 4200 N. Calculate the tensile stress (in N/m2) in the polyme
  6. November 2021, H404/02, Q4(b)(iii) (3 marks): When the polymer rope is under tension it will stretch. Calculate the extension of the polymer rope in m when the stress is at the value you calculated in part
  7. Specimen, H404/01, Q1(d) (2 marks): The total weight of the bicycle and rider is 148N. The area of each tyre in contact with the ground is 500mm2. Calculate the pressure each tyre exerts on the gr

Questions, mark schemes and examiner’s reports are © OCR, from their published past papers. Plumi isn’t affiliated with any exam board. Want whole papers? OCR A-Level Design Engineering past papers.

The Plumi iPad app also offers exam-style questions with AI feedback on your handwritten working.