Skip to content
Android waitlistTry on iPad
Get started

Electronics, circuits and sensors: OCR A‑Level Design Engineering questions

OCR A-Level Design Engineering past-paper questions on 6.4 Electronics, circuits and sensors, 2021–2025, with mark schemes and examiner’s reports where available.

Past paper difficulty
Paper
All papers
Exam
All years

Loading the full question list…

193 questions

  1. Q1(b)(i)

    June 2025 · H404/01 · ★★

    The whole paper ↗
    1
    Setup for original question 1(b)(i)

    Loading the question setup…

    Original question 1(b)(i): The electric toothbrush contains a 3.7 V rechargeable battery. A current of 0.1 A is passed through the battery when it is charging. Calculate the power in watt

    Loading the question…

  2. Q2(b)(i)

    June 2024 · H404/01 · ★★★

    The whole paper ↗
    2
    Original question 2(b)(i): The heater is connected directly to a 24 V dc power supply. Calculate the power dissipated in the heater. Give your answer in watts (W) and show your working. [

    Loading the question…

  3. Q2(b)(ii)

    June 2024 · H404/01 · ★★

    The whole paper ↗
    3
    Original question 2(b)(ii): To reduce the heater power, the current through the heater is repeatedly pulsed on and off. Fig. 2.2 shows a graph of how the current varies over time. Fig. 2.2

    Loading the question…

  4. Q2(b)(iii)

    June 2024 · H404/01 · ★★★

    The whole paper ↗
    4
    Original question 2(b)(iii): The heater uses a 24 V dc power supply. Use your answer from part (b)(ii) to calculate the average power dissipated in the heater when the current is pulsed as

    Loading the question…

  5. Q4(c)(ii)

    June 2024 · H404/01 · ★★★

    The whole paper ↗
    5
    Setup for original question 4(c)(ii)

    Loading the question setup…

    Original question 4(c)(ii): Use annotated sketches and/or notes to show how a suitable sensor can be used to detect when the paddle wheel has rotated 1 6 of a revolution. You must name the

    Loading the question…

  6. Q4

    June 2024 · H404/02 · ★★★★★

    Sources (insert) ↗
    The whole paper ↗
    6
    Setup for original question 4

    Loading the question setup…

    Original question 4: Most new play area developments are surrounded by a perimeter fence to keep children safe and to stop dogs from entering the area. The county recreation departm

    Loading the question…

  7. Q1(d)(i)

    June 2023 · H404/01 · ★★★★

    The whole paper ↗
    7
    Setup for original question 1(d)(i)

    Loading the question setup…

    Original question 1(d)(i): When variable resistor VR1 is set at 20 Ω, the fan runs at 2 its maximum speed. At this speed, the current flowing through the circuit is 250 mA. Calculate the

    Loading the question…

  8. Q1(d)(iii)

    June 2023 · H404/01 · ★★

    The whole paper ↗
    8
    Setup for original question 1(d)(iii)

    Loading the question setup…

    Original question 1(d)(iii): This circuit shows the motor being controlled by a microcontroller and other components. 5V M D G0 G1/A G2 G3/R G4 Q Microcontroller 0V Identify component Q and

    Loading the question…

  9. Q1(d)(iv)

    June 2023 · H404/01 · ★

    The whole paper ↗
    9
    Setup for original question 1(d)(iv)

    Loading the question setup…

    Original question 1(d)(iv): Identify one reason for including diode D in the circuit. [1]

    Loading the question…

  10. Q3(b)(i)

    June 2023 · H404/02 · ★

    Sources (insert) ↗
    The whole paper ↗
    10
    Setup for original question 3(b)(i)

    Loading the question setup…

    Original question 3(b)(i): Use data from Fig. 6 of the Resource Booklet to determine the value of the output voltage from the BP135 sensor when the air pressure is 100 kPa. [1]

    Loading the question…

  11. Q3(b)(ii)

    June 2023 · H404/02 · ★★

    Sources (insert) ↗
    The whole paper ↗
    11
    Setup for original question 3(b)(ii)

    Loading the question setup…

    Original question 3(b)(ii): The output from the BP135 sensor is fed into the analogue input of a microcontroller. The smallest change of input voltage that the microcontroller can detect i

    Loading the question…

  12. Q5

    June 2023 · H404/02 · ★★★★★

    Sources (insert) ↗
    The whole paper ↗
    12
    Setup for original question 5

    Loading the question setup…

    Original question 5: WW wants to explore the feasibility of adding a wind speed sensor to the PWS. The design engineers have to solve the following two issues to help with the devel

    Loading the question…

  13. Q1(c)(i)

    June 2022 · H404/01 · ★★

    The whole paper ↗
    13
    Setup for original question 1(c)(i)

    Loading the question setup…

    Original question 1(c)(i): Each cell produces a voltage of 3.6 V. Calculate the output terminal voltage from the battery pack in volts to 0 decimal places. Show your working. [2] Output t

    Loading the question…

  14. Q1(c)(ii)

    June 2022 · H404/01 · ★★

    The whole paper ↗
    14
    Setup for original question 1(c)(ii)

    Loading the question setup…

    Original question 1(c)(ii): Explain one advantage of building the battery pack with three parallel groups of cells. [2]

    Loading the question…

  15. Q2(a)(iii)

    June 2022 · H404/01 · ★★

    The whole paper ↗
    15
    Original question 2(a)(iii): The resistance of a wire can be calculated using the formula: ρL R = A where: R is the resistance (Ω) ρ is the resistivity of the wire material (Ωm) L is the le

    Loading the question…

  16. Q2(a)(iv)

    June 2022 · H404/01 · ★★

    The whole paper ↗
    16
    Original question 2(a)(iv): Use your answer from part (a)(iii) to calculate the voltage drop along the 3 m length of wire when it carries 25 A. Show your working. [2] Voltage drop V

    Loading the question…

  17. Q4(a)(i)

    June 2022 · H404/01 · ★★

    The whole paper ↗
    17
    Setup for original question 4(a)(i)

    Loading the question setup…

    Original question 4(a)(i): Explain one advantage of using infra-red light rather than visible light in sensing systems such as this. [2]

    Loading the question…

  18. Q4(a)(ii)

    June 2022 · H404/01 · ★★★

    The whole paper ↗
    18
    Setup for original question 4(a)(ii)

    Loading the question setup…

    Original question 4(a)(ii): The IR LED has a forward voltage drop of 1.7 V. A current of 10 mA is required through the IR LED. Use Fig. 4.2 to calculate the resistance of resistor R, to th

    Loading the question…

  19. Q4(a)(iii)

    June 2022 · H404/01 · ★★★★

    The whole paper ↗
    19
    Setup for original question 4(a)(iii)

    Loading the question setup…

    Original question 4(a)(iii): A continuous current of 10 mA flowing through the IR LED could cause significant drain on the battery. Describe options available to the design engineer to mini

    Loading the question…

  20. Q3(b)(ii)

    June 2022 · H404/02 · ★★★

    Sources (insert) ↗
    The whole paper ↗
    20
    Setup for original question 3(b)(ii)

    Loading the question setup…

    Original question 3(b)(ii): Use your answer from part (b)(i) and the information on page 7 of the Resource Booklet to calculate the electrical energy used by the NW20 air pump to fill Boar

    Loading the question…

All 30 questions on Electronics, circuits and sensors, as a list
  1. June 2025, H404/01, Q1(b)(i) (2 marks): The electric toothbrush contains a 3.7 V rechargeable battery. A current of 0.1 A is passed through the battery when it is charging. Calculate the power in watt
  2. June 2024, H404/01, Q2(b)(i) (3 marks): The heater is connected directly to a 24 V dc power supply. Calculate the power dissipated in the heater. Give your answer in watts (W) and show your working. [
  3. June 2024, H404/01, Q2(b)(ii) (2 marks): To reduce the heater power, the current through the heater is repeatedly pulsed on and off. Fig. 2.2 shows a graph of how the current varies over time. Fig. 2.2
  4. June 2024, H404/01, Q2(b)(iii) (3 marks): The heater uses a 24 V dc power supply. Use your answer from part (b)(ii) to calculate the average power dissipated in the heater when the current is pulsed as
  5. June 2024, H404/01, Q4(c)(ii) (3 marks): Use annotated sketches and/or notes to show how a suitable sensor can be used to detect when the paddle wheel has rotated 1 6 of a revolution. You must name the
  6. June 2024, H404/02, Q4 (16 marks): Most new play area developments are surrounded by a perimeter fence to keep children safe and to stop dogs from entering the area. The county recreation departm
  7. June 2023, H404/01, Q1(d)(i) (4 marks): When variable resistor VR1 is set at 20 Ω, the fan runs at 2 its maximum speed. At this speed, the current flowing through the circuit is 250 mA. Calculate the
  8. June 2023, H404/01, Q1(d)(iii) (2 marks): This circuit shows the motor being controlled by a microcontroller and other components. 5V M D G0 G1/A G2 G3/R G4 Q Microcontroller 0V Identify component Q and
  9. June 2023, H404/01, Q1(d)(iv) (1 mark): Identify one reason for including diode D in the circuit. [1]
  10. June 2023, H404/02, Q3(b)(i) (1 mark): Use data from Fig. 6 of the Resource Booklet to determine the value of the output voltage from the BP135 sensor when the air pressure is 100 kPa. [1]
  11. June 2023, H404/02, Q3(b)(ii) (2 marks): The output from the BP135 sensor is fed into the analogue input of a microcontroller. The smallest change of input voltage that the microcontroller can detect i
  12. June 2023, H404/02, Q5 (16 marks): WW wants to explore the feasibility of adding a wind speed sensor to the PWS. The design engineers have to solve the following two issues to help with the devel
  13. June 2022, H404/01, Q1(c)(i) (2 marks): Each cell produces a voltage of 3.6 V. Calculate the output terminal voltage from the battery pack in volts to 0 decimal places. Show your working. [2] Output t
  14. June 2022, H404/01, Q1(c)(ii) (2 marks): Explain one advantage of building the battery pack with three parallel groups of cells. [2]
  15. June 2022, H404/01, Q2(a)(iii) (2 marks): The resistance of a wire can be calculated using the formula: ρL R = A where: R is the resistance (Ω) ρ is the resistivity of the wire material (Ωm) L is the le
  16. June 2022, H404/01, Q2(a)(iv) (2 marks): Use your answer from part (a)(iii) to calculate the voltage drop along the 3 m length of wire when it carries 25 A. Show your working. [2] Voltage drop V
  17. June 2022, H404/01, Q4(a)(i) (2 marks): Explain one advantage of using infra-red light rather than visible light in sensing systems such as this. [2]
  18. June 2022, H404/01, Q4(a)(ii) (3 marks): The IR LED has a forward voltage drop of 1.7 V. A current of 10 mA is required through the IR LED. Use Fig. 4.2 to calculate the resistance of resistor R, to th
  19. June 2022, H404/01, Q4(a)(iii) (4 marks): A continuous current of 10 mA flowing through the IR LED could cause significant drain on the battery. Describe options available to the design engineer to mini
  20. June 2022, H404/02, Q3(b)(ii) (3 marks): Use your answer from part (b)(i) and the information on page 7 of the Resource Booklet to calculate the electrical energy used by the NW20 air pump to fill Boar
  21. June 2022, H404/02, Q4 (16 marks): A start-up company wishes to develop an electronic Paddle Board (PB) Speedometer which gives an indication to the user of the speed that the stand-up paddle boa
  22. November 2021, H404/01, Q1(c)(i) (1 mark): Use Fig. 1.3 to identify the current of the motor when the load on the motor is 0.04 Nm. Motor current A [1]
  23. November 2021, H404/01, Q1(c)(ii) (2 marks): An electronic system is being developed to monitor the torque load on the motor. Fig. 1.4 shows part of the circuit diagram for the new electronic system. Vs M
  24. November 2021, H404/01, Q1(c)(iii) (2 marks): Component c in Fig. 1.4 is a capacitor. Explain one reason why a capacitor is used in electronic systems. [2]
  25. November 2021, H404/01, Q1(c)(iv) (2 marks): The output voltage signal from the circuit in Fig. 1.4 is fed into an amplifier subsystem with a voltage gain of 4. Describe the effect the amplifier will have
  26. November 2021, H404/01, Q4(e)(i) (2 marks): Calculate the current in amps when the electrically powered cool box is plugged into a 12 V supply. Show your working. Current A [2]
  27. Specimen, H404/01, Q2(b)(i) (1 mark): Calculate the minimum rotation angle that can be detected by the shaft encoder. [1]
  28. Specimen, H404/01, Q2(b)(ii) (2 marks): When the optical shaft encoder is rotating at one particular speed, the receiver produces the output current signal shown in Fig.4. Fig.4 (Not to scale) Calcula
  29. Specimen, H404/01, Q2(b)(iii) (2 marks): The receiver on the shaft encoder is connected to the input of a microcontroller as shown in Fig.5. Fig.5 Resistor R is used to convert the current signal from
  30. Specimen, H404/01, Q4(a)(i) (2 marks): The customers’ tickets use a ‘contactless’ technology to enable entry. Describe how one suitable contactless technology enables data to be read from the ticket.

Questions, mark schemes and examiner’s reports are © OCR, from their published past papers. Plumi isn’t affiliated with any exam board. Want whole papers? OCR A-Level Design Engineering past papers.

The Plumi iPad app also offers exam-style questions with AI feedback on your handwritten working.